Prax
Sign InGet Started
LG LRYXC2606BRefrigerator

Error Code E PS

PSD (Position Sensor Device) sensor error — malfunction of PSD sensor

Moderate

Address soon - your appliance may not work properly

Also displayed as: E PS

How to Fix

  1. 1

    Step 1: Check connector between Sub PCB and PSD sensor for loose or disconnected connection. If loose, reconnect or repair.

  2. 2

    Step 2: Measure voltage at CON2 5th Pin ~ 7th Pin. Expected: 4.75 ~ 5.25V. If NOT within spec, replace Sub PCB.

  3. 3

    Step 3: Measure signal voltage at CON2 6th Pin ~ 7th Pin. Expected: Not 0 or 5V (oscillating signal). If reads 0V or 5V (static), replace PSD sensor.

  4. 4

    Step 4: If both voltages are correct, reconnect or repair connector and retest.

Other Error Codes for LRYXC2606B

E It

Defect of ice maker kit — malfunction of in-door ice maker motor

E gF

Defect of flow meter or lack of water supply — malfunction of flow meter. Check connection of flow meter and water supply.

F dS

Defect of freezer defrost sensor — short-circuit or disconnection of defrost sensor

E Id

Defect of freezer craft ice maker sensor — short-circuit or disconnection of craft ice maker sensor

E IC

Defect of Mini Cubed ice maker kit — malfunction of Mini Cubed ice maker motor

E rS

Defect of refrigerator sensor — short-circuit or disconnection of refrigerator sensor

E FS

Defect of freezer sensor — short-circuit or disconnection of freezer sensor

E IS

Defect of ice-room sensor or ice maker sensor — short-circuit or disconnection

Need more help with your LG LRYXC2606B?